Custom Reef Salt for 250 liters according DSR specs
Characteristics:
– Contains no unwanted dirt and heavy metals.
– Simplified production, whereby 6 elements can be adjusted independently.
– Complete production (without weighing) for 250 liters with perfect values.
– Of course you can also make less water, this is easy to read through the table
Application:
– FullDSR starts
– Reset of badly running systems.
– Dilute heavy metals in systems with a surplus
– Adjusting imbalances.
Problems with a surplus of heavy metals are a thing of the past ….
The removal of a surplus is best done with dilution by means of a salt with zero heavy metals. CRS250 has been specially developed for this purpose.
Of course, the detection of the source of the contamination remains priority No. 1, otherwise the water will continue to carry to the sea.
Creating the saltwater with CRS250 is as follows:
- Fill in the desired number of liters (-3.6% less than you need, because after adding the substances increase the volume) osmosis water in a ton and bring it to temperature
- Use a streamer or strong pump to set the water in motion
- Use the supplied table on the CRS bottle to weigh the following products; NaCl +, Ca +, Mg + and CRS250 liquid
These substances may be administered to the water in one go. - MgSO4 and KH + administer (alternately) if all other salts are dissolved and the water is clear (after ~ 5-10 minutes).
For a partial change, the salt water that has been created can be used immediately after it is clear and at temperature (1-2 hours).
For a complete filling / exchange aerate for 12 hours with a flow pump.
There will be no precipitation with the specified values!