Nederlands
Filters and addons
Filters and addons
Osmose / ionenexchangers
Osmose / ionenexchangers
Osmosis and ionen exchangers
Osmosis and ionen exchangers
Osmosis and ionen exchangers
Filters and addons
Filters and addons
Filters and addons
Filters and addons
Filters and addons
We recommend the paper pre-filtering (sediment filter) and the carbon filter (Carbon cartridge) to be replaced at least once a year. The filter with the resin in it depends on the TDS value of the osmosis water. If it is above 3-6 ppm, the resin must be replaced. Earlier, of course, is also possible, for example if it is no longer 0ppm.
If the resin is quickly saturated, then the membrane is most likely to be replaced, which then allows too many substances through which the resin absorbs. This makes it quickly saturated.
To keep the condition of the membrane in good condition, it should never get dry. You can achieve this by installing shut-off valves in the hoses and close them after use.
The rinsing of the membrane must also take place at least once a month, this can be done by the restrictor (white plastic thickening) which is in the hose remove water from the 'dirty' waste and let the water flow for 10 minutes. After rinsing, replace the restrictor and the osmosis device is ready and clean again.