Deltec Skimmer 600i

Deltec 600i protein skimmer is suitable for a 200 to 600 liter aquarium

The Deltec protein skimmer 600i replaces the old SC 1351 model.

The Deltec Skimmer 600i has a newly developed emergency overflow. This prevents the skimmer from “boiling over” when the water level in the skimmer suddenly rises. This can happen, for example, because the delivery pump stops and the water level in the sump rises.

Emergency overflow pipe and controller pipe
The water level in the Deltec Skimmer 600i can be read on the emergency overflow course. The minimum and maximum marks on the foamer make it easy to optimize the water level. Due to the possibility of exchanging the emergency overflow with the controller tube, the user has the possibility to decide how the pipes are arranged.

Pump

The Deltec Skimmer 600i is equipped with the Deltec pump DCC2. This 24 V DC pump can be operated via a controller with 8 positions and can thus be optimally adjusted to the water level and the water load. At the optimum level 3 (for most aquariums) with only 11 watts, approximately 500 liters of air are drawn in.

The ergonomic cylinder shape

Thanks to the ergonomic cylindrical shape, the Deltec Skimmer 600i achieves the best results when skimming. The shape of the skimmer does not rise. This allows the small air bubbles to rise without hindrance, they are completely saturated and they only burst in the riser of the skimmer cup. From there, the skimming waste can be discharged via a drain hose without having to lower the foam bowl.

Hollow room bottom

An additional innovation of the Deltec Skimmer 600i is the hollow room floor. This helps to dampen the sound even more, so that the already silent Deltec Skimmer 600i is called “whisper-quiet”. In addition, the water flows back through the hollow chamber floor. can flow into the aquarium.

Disassembly, dimensions and construction

The normal cleaning of the pump is very easy thanks to the quick dismantling possibility of the skimmer. Deltec Skimmer 600i can be dismantled and mounted without tools. Tests have shown that the pump can be removed from the skimmer in less than 20 seconds. The dimensions of the Deltec Skimmer 600i have been chosen so that the foamer can easily be placed in a sump. Due to the large volume of the cylindrical shape, a small base area is sufficient.

Technical details

* Suitable for aquariums with a capacity of 200 to 600 liters
* Power consumption: 11 watts with an air output of 500 liters per hour
* Sizes (LXWXH): 22 x 14 x 51 cm
* Pump: Deltec DCC2 (adjustable pump)
* Controller for adjustment to water level / load with eight positions
* Recommended water level in the sump: 15 to 25 cm

Features of the Deltec Skimmer 600i

* Very efficient cylinder shape
* Safe due to the newly developed emergency overflow with water level indicator
* Whisper quiet due to a new hollow bottom
* Extremely low power consumption
* Quick and easy pump removal
* Variably adjustable pump