Nederlands
Deutsch
FormFutura EasyFil ABS Glow in the Dark
€34,95
FormFutura EasyFil ABS Glow in the Dark is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament
In stock
FormFutura EasyFil ABS Glow in the Dark (1.75mm, 750 gram)
EasyFil ABS is a user-friendly and high-quality Acrylonitrile Butadiene Styrene 3D printer filament. It operates at slightly elevated printing temperatures compared to regular ABS, yet its exceptional process stability and physical characteristics make EasyFil ABS significantly more impact-resistant and easier to print than standard ABS filaments.
Unique Features
- Outstanding process stability and minimal warping
- Much higher impact resistance than typical ABS
- Strong and durable
- Lightweight
- Viscat softening temperature of approximately 103° C
- A wide selection of vivid opaque colors
General Printing Guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temperature: ± 225 – 270° C | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 – 110° C | Fan speed: 0-30% | Experience level: Intermediate |
| Reef Safe: Yes |
* The settings provided are intended as guidance for finding your optimal print settings. These ranges should be effective for most printers, but please feel free to experiment outside these parameters if you believe it will work better for your printer. There is a wide variety of printers, hot-ends, and printer offsets, making it quite challenging to provide a universally applicable setting.
Filament Length
| ρ: 1.03 g/cc | 50 gr coil | 0.75 Kg spool | 2.3 Kg spool | ||
| Ø 1.75mm | Approximately 20.2m | Approximately 303m | Approximately 928m | ||
| Ø 2.85mm | Approximately 7.6m | Approximately 114m | Approximately 350m |
Product Export Information
| HS Code: 39169090 | Description: Monofilament | Country of origin: The Netherlands |
Compliance *
This filament complies with the directives and regulations listed below:
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
* This declaration of conformity to directives and regulations is based on our current knowledge and may be updated if new information becomes available. It applies only to the products described above.
| Weight | 1 kg |
|---|
Brand
FormFutura
You may also like…
