Adaptive reef toggle box 6 for Neptune Systems Apex
This switch box plugs into the IO port, which is available on all apex controllers and additionally on PM1, PM2, PM3, and ASM modules.
The left and right red toggle switches (Switch 1 & 6) are latching, meaning they stay closed when triggered until you lower them again. The primary use for the toggle switches is to turn something on or off that must stay in that state until you return the toggle to the normal position. For example, one can code an Emergency Shutdown Mode, a Water Change Mode, or turn on your stand lighting.
The metal buttons (Switch 2-5) are momentary switches, which are only closed when depressed. This can be used with appropriate Apex code to start timed events that return to normal operation after a set time. Some examples would be timed Feed Mode, a Photo Mode, to activate stand lights for X minutes, etc. The customization and coding possibilities are endless, using the momentary button to commence your program.
- Works with any Apex Controller
- Six programmable switches
- Connects via I/O accessory port
- Instant professional look and feel
- No building required
- Connection Type: 8 pin Mini DIN (connects to I/O port on Apex)
- Cable Length: 2,44m
- Covered Toggle Switches: 2
- Push-Button Switches: 4
- 6 Toggle/Switch Box
- 2,44 m Black Removable Cable
- Instruction Guide