Aqua Medic Refill System 2.0

Aqua Medic Refill System 2.0 automatically replenishes the evaporated water

Aqua Medic Refill System 2.0 automatic top-up system with safety switch

- Automatic top up of evaporated aquarium water
- Permanent monitoring of the water level in the aquarium by means of float sensors with delay switching
- Adjustable minimum and maximum water level in the aquarium or sump
- Protection for dry running of the filling pump with optical and acoustic alarm. Place more easily in the osmosis compartment for low level detection
- Alarm at low water level of the filling container
- Easy installation and maintenance via plug connections to all cables (incl. Cable protection against unintentional release)
- Safety shutdown in the event of a defective level sensor
- 12V low voltage, including safety transformer 100 - 240V / 50 - 60Hz.

Will be delivered with
- AC / DC power supply, Input 100 - 240 V AC 50/60 Hz, Output 12 V DC 1.0 A
- Controller
- 3 float sensors
- Refill pump Input DC 3.5 - 12 V DC / 0.5 - 5.0 W Hmax = 220 cm Qmax = 350 l / h
- 2 m top-up hose 8 / 12mm

Additional Info
Manufacturer Aqua Medic

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)