Deltec 1500i protein skimmer is suitable for a 1000 to 1500 liter aquarium
The Deltec Skimmer 1500i has a newly developed emergency overflow. This prevents the skimmer from "boiling over" when the water level in the skimmer suddenly rises. This can happen, for example, because the delivery pump stops and the water level in the sump rises.
Emergency overflow pipe and controller pipe
The water level in the Deltec Skimmer 1500i can be read on the emergency overflow course. The minimum and maximum marks on the foamer make it easy to optimize the water level. Due to the possibility of exchanging the emergency overflow with the controller tube, the user has the possibility to decide how the pipes are arranged.
The Deltec Skimmer 1500i is equipped with the Deltec pump DCC3. This 24 V DC pump can be operated via a controller with 8 positions and can thus be optimally adjusted to the water level and the water load. On the (for most aquariums) optimum level 6, with only 22 watts, approximately 1000 liters of air are drawn in.
The ergonomic cylinder shape
Thanks to the ergonomic cylindrical shape, the Deltec Skimmer 1500i achieves the best results when skimming. The shape of the skimmer does not rise. This allows the small air bubbles to rise without hindrance, they are completely saturated and they only burst in the riser of the skimmer cup. From there, the skimming waste can be discharged via a drain hose without having to lower the foam bowl.
Hollow room bottom
An additional innovation of the Deltec Skimmer 1500i is the hollow room floor. This helps to dampen the sound even more, so that the already silent Deltec Skimmer 1500i is whisper-quiet. In addition, the water flows back through the hollow chamber floor. can flow into the aquarium.
Disassembly, dimensions and construction
The normal cleaning of the pump is very easy thanks to the quick dismantling possibility of the skimmer. Deltec Skimmer 1500i can be dismantled and mounted without tools. Tests have shown that the pump can be removed from the skimmer in less than 20 seconds. The dimensions of the Deltec Skimmer 1500i have been chosen so that the foamer can easily be placed in a sump. Due to the large volume of the cylindrical shape, a small base area is sufficient.
- Suitable for aquariums with a capacity of 700 to 1500 liters
- Power consumption: 22 watts with an air output of 1000 liters per hour
- Sizes (LXWXH): 27.5 x 18.5 x 58 cm
- Pump: Deltec DCC3
- Controller for adjustment to water level / load with eight positions
- Recommended water level in the sump: 15 to 25 cm
Features of the Deltec Skimmer 1500i.
- Very efficient cylinder shape
- Safe thanks to the newly developed emergency overflow with water level indicator
- Whisper quiet due to a new hollow bottom
- Extremely low power consumption
- Quick and easy pump removal
- Variably adjustable pump