Focustronic Powertronic
The Powertronic is a smart powerbar on its own and has 3 modes for each socket. It can be set to AUTO or ON/OFF depending on the equipment it is controlling. When set to AUTO, it can work as a 24 hour schedule and also reacts based on tested parameters by Mastertronic and/or Alkatronic.
Focustronic app
Devices that are connected to the Powertronic can be controlled wireslessly while away from home. There are 3 modes, Auto, On, or Off.
Schedule your Devices
The Auto mode is a feature rich function which allows user to set rules to trigger on/off and even the duration of the triggered event. For example, when NO3 is too low, it can turn off your filter or skimmer for a couple hours or days to allow nutrients to raise up again.
With the Focustronic All in One app, the setup cannot be easier! Below is an example of what can be done.
Mastertronic measures the dKH and is over the high reference level and the system is running a calcium reactor. The user has set a rule that when dKH is over 8.5 dKH, the socket 1 on the Powertronic will be switched off. This is the feed pump of the calcium reactor. When the dKH falls back within range, the socket will be switch back on.
What’s in the box
- Powertronic x 1
- Quick Setup Guide x 1
- Input: 110-240VAC
- Output (Sockets): 16A
- Output (USB): 2.1A
- Radio Frequency: WiFi 2.4GHz
- Wifi controllable sockets
- 24 hour scheduls with 30 mintues intervals
- Automation based on real time live data from Alkatronic and/or Mastertronic
- Intuitive app (Focustronic All in One)