Kamoer X2SR Water Change Pump to automate regular water changes on your aquarium
This App controlled, Wi-Fi water change pump is designed to automate regular water changes on your aquarium as well as replenish water lost through evaporation with the inbuilt ATO function.
The pump uses two high quality stepper motors with precision pump heads for accurate removal and replenishment of water during a water change. Each pump head is fitted with Pharmed BPT tubing for a long service live.
Kamoer Remote App
Choose from two water change modes.
Synchronized – Both water change pump heads will run together. This will allow the same amount of clean water to be added as aquarium water is removed keeping the water level stable and constant. Ideal for long water changes or situations where the drop in water level will cause issues with the operating of the aquarium.
In and Out – Will function as a normal water change where the set amount of water is first removed from the aquarium and then clean water is then added to refill to the original water level.
- High quality stepper motors.
- Pharmed BPT long life tubing.
- Secure compression hose joints.
- Built in freshwater auto top up.
- Two automatic water change modes.
- Programmable water change plan frequency.
- Manual water change function.
- Adjustable flow rate for on both pump heads.
- Calibration function for both pump heads.
- Real time clock with battery back-up.
- Supports IOS and Android.
- Wi-Fi control using the Kamoer Remote app.
- Firmware updates through the app.
- Power and pump status LED’s.
- Emergency overflow sensor.
- Auto top up level sensor.
- Warning sensors for water change reservoirs.
- Magnetic sensor mounts.
- Alarm function.
- KHL-B24 Pump heads.
- Water change pump head flow rate up to 900ml/min.
- Dimensions 168mm (L) x 177mm (W) x 223mm (H)
- Up to 24 water change plans per day.
- Power supply input 100-240VAC
- Power supply output 24VDC.
- 9.5mm x 12.5mm PVC hose for water change heads.
- 24V Auto top up pump.
- Auto top up pump maximum flow rate 600 L/H.
- Auto top up pump maximum head 3.5m.
- 8mm x 11mm PVC hose for ATO.
- Supports 2.4G Wi-Fi network.
- App suitable for IOS9.1 and Android 4.4 or above.
- Maximum glass thickness for magnetic sensor mounts 10mm.
- This product only supports 2.4G Wi-Fi, not 5G Wi-Fi.
- X2SR Unit with 2 x KHL-B24 Pump heads.
- Measuring cylinder for pump head calibration.
- Power supply.
- 4 x Magnetic sensor mounts.
- 4 x Float sensors.
- 3 x Clamp on tube holders.
- Automatic top up refill pump.
- Connection cable for top up pump.
- Silicone grease for KHL pump heads.
- 6m of 9.5mm x 12.5mm PVC hose.
- 1.5m of 8mm x 11mm PVC hose.
- Quick start guide.